Sign installation · Dallas Fort Worth
Commercial Sign Installation Across Dallas Fort Worth
Installation is the day everyone sees. Our field team prepares the site, sets the sign with the right lift, makes the electrical connection under our Texas electrical sign contractor license and walks the finished sign with you before leaving.
What does commercial sign installation include?
Commercial sign installation covers everything between the shop and a working sign: confirming the site is ready, locating underground utilities before digging for a ground sign, lifting and mounting the sign, connecting power and checking the result. In Texas, only a licensed electrical sign contractor may do the electrical work on an illuminated sign, and Signs Express is licensed to do it.
What the service includes
Installation, handled end to end.
Site readiness check
Before the crew is scheduled, we confirm access, parking and room to set up a lift, that the permit is issued and that power is where the drawings say it will be.
Utility locates for ground signs
Nothing is dug for a monument or pole sign until underground utilities have been located and marked at the site.
Ground sign foundations
Monument and pole signs stand on foundations built to the engineering details prepared for the site, so the sign stays plumb and secure.
Bucket trucks and lifts
Lifting equipment is matched to the height and weight of the sign and the space available to set up, from storefront fascias to the top of a pole.
Mounting and alignment
Letters, cabinets and panels are fastened to the wall, pole or base with the hardware and pattern from the shop drawings, then leveled and aligned to the approved layout.
Electrical connection
Illuminated signs are connected to the circuit at the sign location under Texas Electrical Sign Contractor #18921. If no circuit is there yet, we flag it early so it can be arranged before installation day.
Final walkthrough
Once the sign is up and lit, we review it with you from the street and up close and confirm it matches the drawing you approved.
Why it matters
A well-built sign can still be installed badly.
Crooked letters, exposed fasteners, a cabinet sitting out of level or a monument that settles after the first heavy rain: these are installation problems, and they stay on the property long after the crew has gone. Installation also carries the most risk of any stage, because the work happens at height, near traffic and around live power.
Because we fabricate the signs we install, the crew arrives knowing how the sign was built, which hardware it takes and how it connects. Nobody is working out a stranger's mounting pattern on the day.
How it works
Our installation process.
- 01
Schedule and confirm
The date is booked once the sign is built and approvals are in hand. We confirm site access, where the truck and lift will park and whether power is ready at the sign location.
- 02
Locate and prepare
For ground signs, utilities are marked before any digging and the foundation goes in to the engineered details. For wall signs, the fascia is checked and the layout is marked from the approved drawing.
- 03
Lift and set
The sign is raised with a bucket truck or lift and fastened to the wall, pole or base. Letters are set to the layout, cabinets are leveled and wall penetrations are sealed against water.
- 04
Connect and power up
Illuminated signs are wired to the circuit at the sign location and switched on, with the electrical work performed under our Texas license.
- 05
Walk it with you
We look at the finished sign together, lit and unlit, from the road and from the door. Anything that needs attention is noted and closed out.
Deliverables
What you receive.
- A sign mounted, leveled and aligned to the approved layout
- Utility locates completed before any digging for ground signs
- Electrical connection made under Texas Electrical Sign Contractor #18921
- Illuminated signs powered up and checked on site
- A final walkthrough with you before the crew leaves
- A work area cleared of packaging and installation debris
From the portfolio
Work this service made possible.
Project examples
See it on real projects.
Keep exploring
Sign types this service supports
Storefront Signs
The sign over the door and the graphics on the glass, working together to turn passing traffic into walk-ins.
Building Signs
Wall-mounted letters, logos and cabinets, scaled to identify a building from the road and engineered for the wall they hang on.
Monument Signs
Low, freestanding signs that mark the entrance and match the architecture behind them.
Pole & Pylon Signs
Freestanding signs raised on poles or pylons, so drivers see your name in time to turn.
Related services
Part of the same project.
Fabrication
Channel letters, cabinets, monuments and dimensional letters made in Carrollton by the company that installs them.
Site Surveys
Measurements, photos, power and access checked on site, so every drawing starts from facts.
Permitting
Code research, landlord approval and city submissions handled in the right order, so installation is not left waiting.
Repair & Maintenance
Diagnosis and repair for dark letters, damaged faces, storm damage and tenant panel changes on signs already up.
Industries
Where this matters most.
Retail
Fascia letters, road-sign panels, window graphics and in-store signs that help a shop win the glance from the parking lot.
Corporate Offices
Lobby logos, halo-lit letters, office graphics and building identification that present the company the way it presents itself.
Warehouse & Industrial
Building letters, entrance monuments, dock and yard directional signs and fleet graphics for warehouses, plants and distribution sites.
Free project review
Plan the day your sign goes up.
Tell us what is being installed, where, and whether the permit and power are already in place. We will map every step between today and a lit, finished sign.
- A photo of the building or site, even from a phone
- Your logo or brand files, if you have them
- The city where the sign will be installed
- Landlord sign criteria, if the space is leased
Straight answers
Installation: common questions.
Something else on your mind? Call (469) 901-3108 or send the details through the quote form.
Who can connect an illuminated sign to power in Texas?
Only a licensed electrical sign contractor. Our license comes from the Texas Department of Licensing and Regulation (Texas Electrical Sign Contractor #18921), so the company that sets your sign also makes its electrical connection.
What happens before you dig for a monument or pole sign?
Underground utilities are located and marked through Texas 811 first. Public locates do not always cover private lines, such as parking lot lighting, irrigation or a line feeding another building, so we also ask the owner or property manager what else may be buried where the foundation will go.
Will installing a sign damage my facade?
A wall sign needs fasteners, so some holes are unavoidable. The aim is to keep them few, put them exactly where the shop drawings say and seal each one against water. Fasteners are matched to the wall material recorded during the survey, so they hold without cracking the finish around them.
Does someone need to be at the property during installation?
Not for the whole visit, but it helps to have someone available at the start to confirm access and at the end for the walkthrough. For leased spaces, we coordinate with the property manager when the landlord requires notice before work on the building.
How long does installation take on site?
It varies with the sign. A set of storefront letters and a ground sign that needs a new foundation are very different jobs, and some installations take more than one visit. When we schedule your installation, we tell you what to expect for your sign.
What if the weather turns on installation day?
High wind, lightning and heavy rain make lift work and electrical connections unsafe. If conditions are not safe, we reschedule rather than rush the job, and we let you know as early as we can.
Can you take down the old sign?
Yes, when the new sign replaces it. Removal is planned into the installation, including what happens to the old fastener holes and electrical on the wall, so the new sign does not go up over loose ends.
Start with the space. End with a landmark.
Your next landmark starts here.
Tell us what you are building and where. One team takes it from survey to switch-on.