Corporate office signs · Dallas Fort Worth
Clients, candidates and partners meet your company at the lobby wall before they meet your people. We design, fabricate and install corporate office signs across Dallas Fort Worth, from halo-lit reception logos and office graphics to the letters on the building outside.
Most offices start with a reception sign: a halo-lit or dimensional logo behind the front desk that confirms the company and sets the tone. From there, wall graphics carry the brand through corridors and meeting areas, directional signs guide visitors, and exterior signs identify the building or suite. In a leased building, the lease and the owner usually decide what goes outside.
The visibility problem
Most office buildings are designed to suit any tenant, which means they say nothing about yours. Visitors step out of the elevator into a corridor of identical doors, and the first real sign of the company is whatever hangs behind reception. If that wall is bare, or carries a logo that looks nothing like the website, the visit starts on the wrong note.
The stakes are practical. Clients form a view of how you work, candidates decide whether they can picture themselves there, and staff walk past the same wall every morning. A lobby sign built to your brand standards, and interiors that carry those standards through the office, make the space feel owned rather than rented.
Recommended sign systems
Letters held off the wall and lit from behind, so the company name sits in a soft ring of light. The effect reads as part of the architecture rather than an advertisement, which is exactly what a reception wall needs.
Explore halo-lit reception letters
Cut letters and logo shapes mounted flat or on short standoffs, with no wiring needed. A strong, clean read on a painted, wood or textured accent wall behind the front desk.
Explore dimensional logo walls
Stone, wood slat and living walls give a lobby character. Letters set on them need hardware planned for the surface and a finish that stands out against the texture without fighting it.
Printed murals, cut vinyl lettering and brand statements turn corridors, break rooms and meeting spaces into part of the brand. They cover whole walls at a scale fabricated letters rarely reach, and they are simple to update when the message changes.
For owner-occupied buildings and tenants with sign rights, letters or a logo on the facade name the company from the road. High-mounted signs need attachment details and lift access, which we plan during the site survey.
Explore building and entry identificationExterior
Exterior signage for an office depends on who owns the building. An owner-occupied building can carry the company name high on the wall, on a monument at the drive and over the main entrance, within the city's sign code. In a multi-tenant building, the owner usually reserves the facade, and a tenant's sign rights are written into the lease, sometimes tied to how much space it occupies.
Where exterior signs are possible, scale matters. Letters high on a building are read from a highway or the far side of a business park, so they are sized for that distance and mounted with attachment details prepared for the wall. A monument at the entry drive, with the street address, helps visitors confirm the turn.
Interior
The reception sign gets the most attention, but the brand should not stop there. Wall graphics in corridors and break areas, lettering that states the company's values or history, and logo treatments in conference rooms turn an ordinary floor plate into a space that feels like one company.
Interior signs are seen from a few feet away, so finish and alignment matter. We match colors to your brand standards, choose materials that suit each wall and mount letters and panels level and centered on concealed hardware, with power for lit signs planned behind the wall.
Wayfinding
Staff learn the building in a day. Visitors have to find their way cold. Directional signs from the elevator lobby or front entrance to reception, and from reception to meeting rooms and training spaces, spare guests from wandering a floor looking for someone to ask.
On multi-floor offices and larger campuses, directories and directional signs that share the lobby sign's finishes and lettering make the whole space feel like one address.
Landlords, sites and permits
Office sign projects usually happen inside someone else's building and on someone else's construction schedule. These are the constraints we plan around.
Multi-tenant office buildings usually control what goes on the facade, the monument and often the shared lobby. We prepare drawings for building management and the owner before anything is ordered.
Stud walls, glass, stone and tile each need different mounting hardware, and heavier or lit signs may need blocking inside the wall. Planning that before the walls close saves opening them up later.
A halo-lit lobby sign needs a power source hidden behind or near it, located during the build-out. Illuminated sign electrical work must be done by a licensed electrical sign contractor.
Exterior office signs usually need a city sign permit, and high-mounted letters need attachment details. We prepare engineering details and coordinate sealed engineering where the city or site requires it.
Corporate brands often specify exact colors, typefaces and clear space around the logo. We work from your standards and send proofs for your marketing team's approval before fabrication.
Interior signs are usually among the last items installed in a build-out. We coordinate dates with your general contractor and facilities team so signs go up after the walls are finished and before the first visitors arrive.
From the portfolio
Project evidence
Keep exploring
Lobby logos, halo-lit letters, wall graphics and wayfinding that carry your brand past the front door.
Wall-mounted letters, logos and cabinets, scaled to identify a building from the road and engineered for the wall they hang on.
Low, freestanding signs that mark the entrance and match the architecture behind them.
Services
Concepts shown on photos of your own building, developed into drawings a shop can build.
Attachment, foundation and electrical details that let a sign be permitted, built and trusted in North Texas weather.
One point of contact who sequences approvals, fabrication and installation around your construction and opening dates.
Site prep, utility locates, lifts, mounting and licensed electrical connection, closed out with a walkthrough.
Free project review
Share your logo, your brand standards and a photo of the reception wall with rough dimensions. We will recommend a style, a finish and whether lighting suits the space, and tell you what building management will need to approve.
Straight answers
Something else on your mind? Call (469) 901-3108 or send the details through the quote form.
It depends on the room. Halo lighting adds depth and draws the eye in a lobby with low or even light, and it keeps the sign visible in the evening. In a bright, sunlit reception area, well-finished non-lit dimensional letters can look just as sharp without needing power. We look at the wall and the lighting before recommending either.
Only if your lease grants sign rights. Building owners often reserve the top of the building for major tenants and offer others a panel on the monument or a sign at the suite entrance. Send us the sign section of your lease and we will explain what it allows and prepare drawings for the owner's approval.
Early enough to plan the wall. Lit signs need power in the right spot, and heavier signs may need blocking inside the wall, both of which are easy to add before drywall goes up and harder afterward. Ordering during design also keeps the sign from being the last item on the punch list before move-in.
We work from your brand standards and match paint and material colors to the values you specify, then send proofs for approval before fabrication. Some colors look different in acrylic, metal and vinyl, or when lit, so we flag those differences early and show you the options.
Yes. Printed murals, cut vinyl lettering and brand graphics for corridors, break rooms and meeting spaces are part of our interior work. We design them alongside the lobby sign so the whole office uses one set of colors and typefaces.
Sometimes. Letters and panels can often be removed and reinstalled, but a sign built for one wall may be the wrong size, color or lighting for the next. We can assess the existing sign, take it down carefully and advise whether to reinstall, adapt or replace it.
Exterior signs usually do. Most DFW cities require a permit for a permanent exterior sign, and lit signs need licensed electrical sign work. Lobby signs inside the building are generally a matter for your lease and building management rather than the city's sign code, although lit ones still need proper electrical work.
Your logo files and brand standards, photos of the wall or building with rough dimensions, and whether you want the sign lit. For exterior signs, the sign section of your lease and a contact at building management help us confirm what is allowed.
Start with the space. End with a landmark.
Tell us about the property and the people you need to reach. We will recommend a sign system that fits.